FC interior (dome) lighting wiring question
#1
Just take the blue pill..
Thread Starter
FC interior (dome) lighting wiring question
Hello all.
Quick question for the FC electrical wiring gurus out there. I am in the process of wiring a dome illumination relay for an alarm install on the FC. I have concluded that the door triggers are negative (-) switched, but I cannot seem to figure out if the dome lights are negative (-) or positive (+) switched. Can anyone shed some light on this for me?
Thanks
Quick question for the FC electrical wiring gurus out there. I am in the process of wiring a dome illumination relay for an alarm install on the FC. I have concluded that the door triggers are negative (-) switched, but I cannot seem to figure out if the dome lights are negative (-) or positive (+) switched. Can anyone shed some light on this for me?
Thanks
#2
Rotary Enthusiast
iTrader: (18)
Join Date: May 2008
Location: Texas BABY!
Posts: 1,150
Likes: 0
Received 0 Likes
on
0 Posts
Hello all.
Quick question for the FC electrical wiring gurus out there. I am in the process of wiring a dome illumination relay for an alarm install on the FC. I have concluded that the door triggers are negative (-) switched, but I cannot seem to figure out if the dome lights are negative (-) or positive (+) switched. Can anyone shed some light on this for me?
Thanks
Quick question for the FC electrical wiring gurus out there. I am in the process of wiring a dome illumination relay for an alarm install on the FC. I have concluded that the door triggers are negative (-) switched, but I cannot seem to figure out if the dome lights are negative (-) or positive (+) switched. Can anyone shed some light on this for me?
Thanks
#4
Just take the blue pill..
Thread Starter
Ok so when wiring in an illumination relay for an alarm, should the wiring go as follows?
85 - 12V fused
86 - lead from the alarm
*30 to 87a - (Ground)
87 - light trigger (Blue/red on fc harness)
*30 to 87a not sure if this should be ground or 12V fused
thanks again
85 - 12V fused
86 - lead from the alarm
*30 to 87a - (Ground)
87 - light trigger (Blue/red on fc harness)
*30 to 87a not sure if this should be ground or 12V fused
thanks again