FC Fitment
Thread Starter
Junior Member
Joined: Sep 2020
Posts: 17
Likes: 0
From: Australia
FC Fitment
I've been looking at this page: FC3S Pro v2.0: Mods - Rims
And I've found a set of rims I like, The Rears are perfect, But the fronts are 17x8 +20, The website says 17x8 will fit, But if the offset is between +25 ~ +35.
So the question is, Will i fit 17x8 +20 with rolled guards? not pulled, Just rolled.
Any advice in this subject will be appreciated.
And I've found a set of rims I like, The Rears are perfect, But the fronts are 17x8 +20, The website says 17x8 will fit, But if the offset is between +25 ~ +35.
So the question is, Will i fit 17x8 +20 with rolled guards? not pulled, Just rolled.
Any advice in this subject will be appreciated.
Yes. Use the search function and you'll find a thread called "fc wheel fitment" covering years of random wheel/tire setups. I for example run 17x9 +20 and 245s on all 4 corners with rolled stock fenders. The car is lower than I'd prefer currently and it doesn't rub.
Thread Starter
Junior Member
Joined: Sep 2020
Posts: 17
Likes: 0
From: Australia
Is this with Coilovers? I'm currently on springs.
Thread
Thread Starter
Forum
Replies
Last Post
exStrat
2nd Generation Specific (1986-1992)
12
Nov 17, 2017 12:59 PM