2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

FC engine trouble

Thread Tools
 
Search this Thread
 
Old 07-05-05, 01:51 PM
  #1  
Full Member

Thread Starter
 
outlawdsm's Avatar
 
Join Date: Jul 2005
Location: Co, USA / Yokohama, JP
Posts: 74
Likes: 0
Received 0 Likes on 0 Posts
FC engine trouble

I was driving my FC on the highway, 50mph, 5th gear, like 2500rpm, when it suddenly started to cut out like it was running out of fuel, it then began to smoke and died, all in a matter or about 20 sec's. Car wouldnt restart. The smoke was oil smoke for sure and when i popped the hood i could see that oil had sprayed all over the back driver-side of the engine bay. I couldnt tell where the oil came from. The car is a 88 n/a, all stock. any help would be greatly appreciated.

What is the best option for me if my n/a FC has a blown motor? Rebuild it? Buy new motor, if so from where? Try to pull one out of a junkyard car? kill myself?

I dont know much about Rotories, I just bought this car, and only got to drive for 10 miles before this happened. I was hoping this car could be a nice daily driver...
Old 07-05-05, 01:53 PM
  #2  
Senior Member

 
Camrann's Avatar
 
Join Date: Feb 2005
Location: Fort worth, TX
Posts: 327
Likes: 0
Received 0 Likes on 0 Posts
that sucks. Did u blow the oil line? And chances are if u blew something like that its gonna be a rebuid
Old 07-05-05, 01:59 PM
  #3  
Full Member

Thread Starter
 
outlawdsm's Avatar
 
Join Date: Jul 2005
Location: Co, USA / Yokohama, JP
Posts: 74
Likes: 0
Received 0 Likes on 0 Posts
i am not sure, if i blew the oil line, would it smoke oil out the exhaust? There is oil spots on the back of the car from it smoking so bad....
Old 07-06-05, 12:56 AM
  #4  
Full Member

Thread Starter
 
outlawdsm's Avatar
 
Join Date: Jul 2005
Location: Co, USA / Yokohama, JP
Posts: 74
Likes: 0
Received 0 Likes on 0 Posts
anybody else have an idea what could have gone wrong?
Old 07-06-05, 01:00 AM
  #5  
Rotary Enthusiast

 
jono20's Avatar
 
Join Date: May 2005
Location: Vernon, BC
Posts: 1,135
Likes: 0
Received 0 Likes on 0 Posts
well the oil in the engine bay had to come from SOMEWHERE. find out where then go from that...
Old 07-06-05, 01:04 AM
  #6  
it go down in the dm

iTrader: (10)
 
danegerous's Avatar
 
Join Date: Jan 2005
Location: Vegas
Posts: 1,398
Received 6 Likes on 5 Posts
i think there is an overflow and if you over fill and it shoots out of there when its underpressure but mine is bareblocked so it could be something else. I doubt its blown though. I can get you a short blovk probably for free if the kid stillhas it good luck and lets hope it doesnt come to that
Old 07-06-05, 01:18 AM
  #7  
Full Member

Thread Starter
 
outlawdsm's Avatar
 
Join Date: Jul 2005
Location: Co, USA / Yokohama, JP
Posts: 74
Likes: 0
Received 0 Likes on 0 Posts
come to think of it, i do believe it was over filled with oil.... i should find out tommarow.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ppritchard
Interior / Exterior / Audio
1
08-21-15 06:02 PM
Marty RE
New Member RX-7 Technical
0
08-17-15 09:36 AM
Junkee
New Member RX-7 Technical
2
08-15-15 01:57 PM
Marty RE
New Member RX-7 Technical
0
08-13-15 11:19 AM



Quick Reply: FC engine trouble



All times are GMT -5. The time now is 05:42 AM.