everything's working but it still won't start...
everything's working but it still won't start...
ok, well i'm getting spark, fuel, and compression.
i've got an S5 TII motor stripped of everything. no PS, AC, no emissions, microtech and a full to4e and open downpipe.
the coils are firing, the injectors are clicking, the downpipe spits out white smoke when i crank the motor. the fuel pump works fine, good pressure. the motor spins fast enough. the motor has great compression.
it is NOT flooded. new wires/plugs.
I AM LOST.
any help is great. i just wanna start this thing up once and for all.
i've got an S5 TII motor stripped of everything. no PS, AC, no emissions, microtech and a full to4e and open downpipe.
the coils are firing, the injectors are clicking, the downpipe spits out white smoke when i crank the motor. the fuel pump works fine, good pressure. the motor spins fast enough. the motor has great compression.
it is NOT flooded. new wires/plugs.
I AM LOST.
any help is great. i just wanna start this thing up once and for all.
I had a similar issue a few years back. Turned out it was the ground wire on the back of the motor. Its attached to a clicp on the firewall and goes to the bellhousing. Have you tried to push it off. I was able to do that before I figured out it was the ground wire.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
thecody59
1st Generation Specific (1979-1985)
40
Aug 23, 2015 06:41 PM



