MazdaRx7Racer4Life

I just got my car out of the shop, can't test/dyno yet so I figured Id let you guys take a crack at it, here are my mods:

Large/Aggressive STreetport ON Brand New Rebuild
Ported Wastegate
RacingBeat Turboback exhaust.
Banzai TID
HKS PFC FCON
RacingBeat FCD
Soon To Come: HKS SSQV

Anyone wanna take a guess at my hp? Anyone with similar mods?

nonameo

if you don't have it boost controlled you are probably creeping to about 9 psi if this is a s4. not sure on the s5. 8psi is probably around 220hp. but you are streetported so maybe 230-240...

you really should get larger injectors and a boost controller.

with a boost controller you could bump up to 12 psi if you have larger injectors and replace/rewire your fuel pump with a higher flowing unit. do this and I would think you would be around 260-270 something

this is all flywheel horse.

blowoff valve will not give you any more power.

edit: actually, you would not be
12psi... I am thinking stock ports. The point is though that the stock turbo can only go so far... you're probably making more than I mentioned, though the stock turbo is going to run out of steam.

pip

Did you install a new flapper when you ported or did you just port it as big as the stock flapper would let you?

MazdaRx7Racer4Life

I put in an S5 flapper.

Icemark

2?

sirx7

what is a banzai TID?

MazdaRx7Racer4Life

Add a couple of numbers

MazdaRx7Racer4Life

Turbo Inlet Duct, its like intake.

Icemark

Any numbers??? okay... say 6 and 3 added to the 2 that would make 11 is that better???

I mean common... you can't guess or are you just bragging???

You didn't even say what year you were working with or who did the porting...

And you think anyone is going to be able to figure out even a marginally close number???

MazdaRx7Racer4Life

Actually, it was a subtle way of sharing my mod with everyone.

pip

Got any pictures of that tid?

J-Rat

iTrader: (2)

Once you get that SSQV BOV, you might go to 12..

MazdaRx7Racer4Life

psi maybe?