2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Escort E-Fan how-to?

Old Jun 1, 2006 | 03:53 PM
  #1  
blackb15's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Apr 2006
Posts: 122
Likes: 0
From: GJ, CO
Escort E-Fan how-to?

Is there one on this site? I searched the archive and the regular forum and got several topics, but no how-to's. Is it pretty straight forward? My brother located one in our junkyard, and I want to put it in my 88 SE. Thanks!
Reply
Old Jun 1, 2006 | 04:34 PM
  #2  
-efini-'s Avatar
I AM A THIEF!!! I AM A THIEF!!!
Tenured Member 05 Years
 
Joined: Jan 2006
Posts: 296
Likes: 0
From: Ontario Socal
Theres a few ways to do it... Im running a taurus efan on my 88Gtxl-2.

You can run power to it, from the fuses box, then put the ground on a switch, and controll it manually. Or you can buy a temp switch kit from autozone. That is what i did, and it works hella sick.
Reply
Old Jun 1, 2006 | 04:38 PM
  #3  
Boostmaniac's Avatar
Senior Member
Tenured Member 15 Years
 
Joined: Mar 2006
Posts: 675
Likes: 0
From: Louisville, Ky
on the temp switch, where do you install it so the fan comes on correctly?
Reply
Old Jun 1, 2006 | 05:55 PM
  #4  
uhh's Avatar
uhh
Full Member
Tenured Member 05 Years
 
Joined: May 2006
Posts: 50
Likes: 0
From: Sarasota Florida
You dont really need a temp switch, think about it. The stock clutch fan is on permanently anyway: not counting whatever specific RPM it disengages at anyway.
Reply
Old Jun 1, 2006 | 10:24 PM
  #5  
topspeed7's Avatar
rx7doingeleven
Tenured Member 05 Years
 
Joined: Apr 2006
Posts: 483
Likes: 0
From: Del rio, TX
i actually i just installed mine today and all i did was hookup the ground to the chassis and the hot to a relay and used my megasquirt to turn the fan on at a sertain temp but u can install a electric temp unit from autozone or advance auto parts and install the thermal unit on the radiator and its also adjustable
Reply
Old Jun 1, 2006 | 10:36 PM
  #6  
BklynRX7's Avatar
King of the Loop
Tenured Member 15 Years
 
Joined: Apr 2004
Posts: 2,620
Likes: 1
From: brooklyn, New York
Arrow

Im using 2 integra e-fans on the car im putting together. Im just gonna hook them up to soem switched in the car and turn them on when I get it, it might be more practical to have a temp switch if its a street car though.
Reply
Old Jun 2, 2006 | 02:06 AM
  #7  
NZConvertible's Avatar
I'm a boost creep...
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 15,608
Likes: 8
From: Auckland, New Zealand
Originally Posted by blackb15
Is there one on this site?
Not Escort-specific, but that shouldn't matter.

http://aaroncake.net/RX-7/efanmyth.htm
http://aaroncake.net/RX-7/efaninstall.htm

Originally Posted by -efini-
You can run power to it, from the fuses box, then put the ground on a switch, and controll it manually.
NEVER power an e-fan from the fuse box. They should only ever be powered directly from the battery via a fuse and relay. A manual switch is also pretty dumb. One day you will forget to turn it on.

Originally Posted by uhh
You dont really need a temp switch, think about it. The stock clutch fan is on permanently anyway: not counting whatever specific RPM it disengages at anyway.
There's always at least on in every e-fan thread...

The thermoclutch fan is not "on permanently", it's is engaged and disengaged based on the temp of the air off the radiator, so it's only used when needed. Running an e-fan constantly is pointless and stupid. Can you think of one car with a stock e-fan that doesn't operate thermostatically?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
immanuel__7
2nd Generation Specific (1986-1992)
89
Sep 5, 2015 10:23 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:22 PM.