My current project that i've been workin on for the past month needs a new engine. I got a 1986 SE, the f'n base line model. Anyway the motor needs to be Replaced so i was going to drop the turbo motor in it. How hard of a conversion is this, going from a N/A to a 13B-Turbo?

 

go look in the faq for answers before you get flamed

if I were you I would stay na

 

This thread is being closed because this topic is either covered in the FAQ or has been covered many times before. It is suggested that you make use of the search feature and read the FAQ to find your answer. If you still cannot find what you are looking for, then feel free to post your question indicating that you have already looked for an answer, and someone will probably be happy to help.

Please be aware that this forum has been around for quite a while, and almost every common question has been covered many times in the past. All this information is available by using the search function. Common questions are also already answered in the FAQ.

Some of the questions covered in the FAQ include:

-NA to Turbo conversions
-Electrical problems
-Stereo wiring
-Wheel sizes
-Stock HP and torque specs for all models
-Common abbreviations
-Common electrical problems
-much, much more

The 2nd Gen Forum also keeps an Archive of popular and informative posts. You can access this archive by using the links at the top of this forum.

Helpful links:
-FAQ: https://www.rx7club.com/forum/showthread.php?t=181219
-Search: https://www.rx7club.com/forum/search.php
-Archives: https://www.rx7club.com/forum/forumdisplay.php?f=72

Thank you,
The Moderators