Engine Restore??
#1
Full Member
Thread Starter
Join Date: May 2001
Location: North Ogden, UT
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Engine Restore??
I was wondering if there are any engine restore products that work on the N/A rx7, I know they make it for 4, 6, and 8 cylinders and I was wondering if I could put any of those into the engine??? Or will putting ATF in work too??
Thx
Just got done with the jdm tail light conversion and it is the simpliest thing I have ever done.. Thanks to you guyz. Thanks for all of your help, I couldnt of done it with out you..
Thx
Just got done with the jdm tail light conversion and it is the simpliest thing I have ever done.. Thanks to you guyz. Thanks for all of your help, I couldnt of done it with out you..
#3
Super Raterhater
iTrader: (6)
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,624
Likes: 0
Received 2 Likes
on
2 Posts
what kind of issues are you having with your NA currently? There's not much need to really put ATF in it unless it's carbon locked/hard to start/lost compression/etc, if you don't have any issues you probably shouldn't run it, as it can be harmful to the oil rings. Give us a little more info as to why you what problems you are having
#4
Full Member
Thread Starter
Join Date: May 2001
Location: North Ogden, UT
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Well a lot of the time my car has problems starting, such as it takes up to 5 seconds of cranking to get it started and sometimes it starts then dies, most of the time it seems to take forever to start as if the fuel pump is goin out but I just replaced the fuel pump and fuel filter about 200 miles ago.
And sometimes it seems like I dont have a stead power increase or it runs better sometimes than others.
And sometimes it seems like I dont have a stead power increase or it runs better sometimes than others.
Thread
Thread Starter
Forum
Replies
Last Post
Jose A.
3rd Generation Specific (1993-2002)
19
08-27-15 11:41 PM