engine removal help - down to the last bolt
#1
engine removal help - down to the last bolt
but it won't come out. It's the bolt that holds the securing bracket of one of the AC lines to the AC pump. The bold head bumps up against the frame.
I seem to have two options...
1> pull the engine just a little bit to finish removing the bolt ( and reverse for install, which I'll forget).
2> cut the securing bracket.
I'm leaning toward option two right now, unless somebody can tell me what the secret move is to get this thing out.
I'm including a photo that will hopefully make my rambling more clear.
-Mark
I seem to have two options...
1> pull the engine just a little bit to finish removing the bolt ( and reverse for install, which I'll forget).
2> cut the securing bracket.
I'm leaning toward option two right now, unless somebody can tell me what the secret move is to get this thing out.
I'm including a photo that will hopefully make my rambling more clear.
-Mark
#2
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,841
Received 2,605 Likes
on
1,848 Posts
simple, loosen all 4 bolts and move the compressor away from the engine, pull engine. a/c stays in the car
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM