Engine Mods?
Thread Starter
Rotary Enthusiast
Joined: Dec 2001
Posts: 1,271
Likes: 0
From: UK
Engine Mods?
Ok this is what i have done to my new Engine build!
Extended port the Primarys (basicly make them the same size as the Stock secondrys) on 13bt center plate
Bp the Secondrys on 13B-Re plates
Open the Exhaust ports up so they are moved down to save overlap and wider on 13b-rew Housings
S4 ft cover and Omp
Hardened Stationary gears
Race Clearanced Rotors + 2mm stock tips
Thermo Pellet Mod+ 80psi oil regulator
Sump Baffle plate
To come is Flywheel, Counter weight and clutch
Is there anything i've missed that needs to be done before i bolt it all together?
I'm trying to get into the 500rwhp figures (depending on what Turbo i decide to fit ) do you think this engine in this spec will be on that sort of level?
Extended port the Primarys (basicly make them the same size as the Stock secondrys) on 13bt center plate
Bp the Secondrys on 13B-Re plates
Open the Exhaust ports up so they are moved down to save overlap and wider on 13b-rew Housings
S4 ft cover and Omp
Hardened Stationary gears
Race Clearanced Rotors + 2mm stock tips
Thermo Pellet Mod+ 80psi oil regulator
Sump Baffle plate
To come is Flywheel, Counter weight and clutch
Is there anything i've missed that needs to be done before i bolt it all together?
I'm trying to get into the 500rwhp figures (depending on what Turbo i decide to fit ) do you think this engine in this spec will be on that sort of level?
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
Mar 17, 2022 02:46 PM
ncds_fc
New Member RX-7 Technical
1
Aug 15, 2015 10:06 AM
