phil'srx7

I have a 1990 rx7 and the engine light is telling me the I have an issue with my crank agle sensor and my trailing ignition coil now I'm a new rx7 owner and from what I can see the c.a.s is adjustable is that the case or does it need to be replaced and if it is adjustable will it also correct my ignition coil issue? Thank you for reading.

satch

iTrader: (1)

The CAS is adjustable but your error code probably points to a connection problem so check the quality of the plug connection. And do the same thing w/the coil for starters.

phil'srx7

Ok thank you ill do that when I get home tonight and if the connections are tight and correctly connected what then

misterstyx69

iTrader: (142)

Even though the connection may be tight it could be corroded.So just to make sure I would unplug that connection and inspect it.

texFCturboII

iTrader: (17)

Besides corrosion, another thing to look for when you inspect the plugs is that the metal pins themselves have not been pushed back over time, therefore not making a good connection. This happens more commonly on some of the other connector types (specifically the bosch injector style clips) but it's something to look for, still.

phil'srx7

Ok thank you for the help ill be sure to do a full inspection of all the clips if they are corroded what's the best thing to use to clean them and I'm assuming dielectric grease would be a good idea

phil'srx7

Ok so I checked all the plugs and there is no corrosion on any of them and all the pins are in the right place none bent now I can't get it to start was running rough 2 days ago now nothing acts like its going to fire up but won't really need help here any advice is greatly appreciated