engine
#1
Newbie
Thread Starter
Join Date: Feb 2004
Location: new jersey
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
engine
what should i put in my 87 fc im all for ideas becasue i dont know any one who owns a rotary motor so i have a limit of about 2500. i want to be able to slide around and **** on my cousins 240..
#3
Rotary Freak
Join Date: Jun 2003
Location: Metro Detroit
Posts: 1,709
Likes: 0
Received 0 Likes
on
0 Posts
A limit up to $2,500 for the motor or for the motor and installation?If it's $2,500 for just the motor get a 13B RE Cosmo motor.See the 2nd Gen for sale section.
Good luck and welcome to the forum.
- Aaron -
Good luck and welcome to the forum.
- Aaron -
#4
#1 Certified Cone Killer
Join Date: Mar 2002
Location: Battle Creek, MI
Posts: 936
Likes: 0
Received 0 Likes
on
0 Posts
if you mean to ask what mods you should choose with a $2500 budget then start with the basics
-full tune up (plugs, wires, fluids, etc)
now depending on the route you want to take
1.power
-exhaust
-intake
-safc
2. handling
-racing beat suspension package
-f/r sway bars
-camber adjuster (you said you want to slide)
mix em up and have some fun.
-full tune up (plugs, wires, fluids, etc)
now depending on the route you want to take
1.power
-exhaust
-intake
-safc
2. handling
-racing beat suspension package
-f/r sway bars
-camber adjuster (you said you want to slide)
mix em up and have some fun.
#5
Moderator
iTrader: (1)
I'm not sure If your thread Is appropiately titled with what you are asking.
If you are asking for ways to make your non-turbo FC faster, than their Is alot of Info here. https://www.rx7club.com//showthread....threadid=31410
Look to the 2nd Archives for more Info on pissing on Nissans.
If you are asking for ways to make your non-turbo FC faster, than their Is alot of Info here. https://www.rx7club.com//showthread....threadid=31410
Look to the 2nd Archives for more Info on pissing on Nissans.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM