Emissions removal.
#1
Rotary Freak
Thread Starter
Join Date: Nov 2004
Location: Austin-Houston Texas
Posts: 1,879
Likes: 0
Received 0 Likes
on
0 Posts
Emissions removal.
well I did emission removal on my s4 t2. and I donthaev any vacum line s running to the side of the UIM on both sides and I didnt connect anything for my TB ..whould that cause the car not to start
#3
Fast when it works
Join Date: Oct 2005
Location: Missoula MT usa
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
Arent there supposed to be some lines on those nipples on the sides of the intake when you remove emissions? And dont you need to cap them off when there arent any?
I was just reading up on the FAQ in the 2nd gen section getting ready to ditch my rats nest... it if i remember correctly, you should have the oil injector vacuum line, the FPR line and probably something else that i dont remember... I see you have lots of posts so i probably just wasted your time...
I was just reading up on the FAQ in the 2nd gen section getting ready to ditch my rats nest... it if i remember correctly, you should have the oil injector vacuum line, the FPR line and probably something else that i dont remember... I see you have lots of posts so i probably just wasted your time...
#4
My job is to blow **** up
iTrader: (8)
http://www.rotaryresurrection.com/ro...emisremov.html
the one i used for re-installing my turbo engine
http://maz_tutorials.ten15.net/Tutorial_1_print.pdf
the one i used for my friends 12a fb, solved his vac leaks to get the car back to normal after 5 years of not idling, or hardly running at all...
the one i used for re-installing my turbo engine
http://maz_tutorials.ten15.net/Tutorial_1_print.pdf
the one i used for my friends 12a fb, solved his vac leaks to get the car back to normal after 5 years of not idling, or hardly running at all...
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM