Electrical - Window - Need Suggestions
#1
My RX7 made me a mechanic
Thread Starter
iTrader: (7)
Join Date: Feb 2007
Location: barrie, ON
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
Electrical - Window - Need Suggestions
I am in the process of replacing my window regulator on the passenger side... after a full afternoon, I finally got out the old one which seized in the fully up position, but now I am stuck because the new one doesn't work... the scrapyard said they tested everything before they sell it and I know this is true because I can see where they cut the wire to check..... I have no voltmeter but will have access to one tomorrow... Is there any1 who has had this problem or just knows where and what to check? My fuse is good btw... and my driver side window sitch is broken, so I have no cap on it... my driver side window works (down with pliers, up with the tab) but the window lock tabs are missing... I am going to pull them out of the passenger window that I got the regulator from because they are the same but which way is lock which way is unlock?
#3
My RX7 made me a mechanic
Thread Starter
iTrader: (7)
Join Date: Feb 2007
Location: barrie, ON
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
I unbolted the regulator and let it slide (carefully) down to the bottom of the door.... at that point, I removed the window holding crews through there the top bolts come through the door
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM