2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Electrical Problems.....starter wires...

Thread Tools
 
Search this Thread
 
Old Jan 14, 2006 | 09:18 PM
  #1  
Eternal_Gamer's Avatar
Thread Starter
Rotary Freak
Tenured Member: 20 Years
iTrader: (10)
 
Joined: Nov 2003
Posts: 2,465
Likes: 1
From: Marysville, CA
Electrical Problems.....starter wires...

My car used to have a 6 disc and alarm installed. The engine cranked when the key was turned to start and it started up too. All those wires for the cd and alarm under the steering wheel were annoying, so I tore them off. but now I have two speaker wires left that connect to the starter power and starter ground. What wires do these connect to? The ignition no longer works with the key turned to start. I jumped the wires with the battery and it starts cranking. so the starter solenoid is ok, but where do I put these two wires? To top it off, I still haven't solved why my fuel pump isn't working when it is getting power when I check it with the light tester. sucks, that this is holding me back from getting my car up and running. If anyone can come down to Fresno, California, I am willing to pay them. I just need this thing done with. Pm me if you can.
Reply
Old Jan 15, 2006 | 01:21 AM
  #2  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
There is not such thing as starter power and ground under the dash. You probably removed the starter kill relay from the alarm system, when you cut the wires, and they just need to be jumpered back together.

And you bump has been deleted. Bumps are forbidden in the 2nd gen technical section
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WANKfactor
1st Generation Specific (1979-1985)
6
Sep 29, 2015 01:14 PM




All times are GMT -5. The time now is 09:36 AM.