2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Electrical issues illum fuse

Thread Tools
 
Search this Thread
 
Old Jan 24, 2012 | 09:51 PM
  #1  
FConvertible's Avatar
Thread Starter
Full Member
iTrader: (7)
 
Joined: Jan 2010
Posts: 202
Likes: 0
From: los angeles
CA Electrical issues illum fuse

Turned key to lock to shut off motor, and nothing. Motor would not shutoff, and smoke starts coming out from my dashboard. Shut off motor and check my fuses. The illum fuse is melted along with the connector on the board. Now, when I turn on the ignition, my head lights go up and down with the switch off. Advice needed...
Reply
Old Jan 24, 2012 | 10:08 PM
  #2  
rx7_FREAKKK's Avatar
They live We sleep
iTrader: (1)
 
Joined: Feb 2009
Posts: 919
Likes: 0
From: Dot Island
Originally Posted by FConvertible
Turned key to lock to shut off motor, and nothing. Motor would not shutoff, and smoke starts coming out from my dashboard. Shut off motor and check my fuses. The illum fuse is melted along with the connector on the board. Now, when I turn on the ignition, my head lights go up and down with the switch off. Advice needed...
Melted wireing harness,crossed wires, Or Your car got possesed By a magician with smoke effects

Last edited by rx7_FREAKKK; Jan 24, 2012 at 10:11 PM.
Reply
Old Jan 25, 2012 | 12:22 PM
  #3  
FConvertible's Avatar
Thread Starter
Full Member
iTrader: (7)
 
Joined: Jan 2010
Posts: 202
Likes: 0
From: los angeles
I was afraid I would have to replace the entire wiring harness. Anybody got a spare s4 vert fuse box (one located under the driver side dash) for sale?
Reply
Old Jan 25, 2012 | 12:28 PM
  #4  
satch's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jun 2005
Posts: 11,738
Likes: 16
From: tulsa,ok.
Have you done "any" wiring to the car before it decided to fritz out? The cause for the car not turning off was either the ignition switch was problematic or a plug was improperly connected to another plug or the fuse box was incorrectly passing voltage from one fuse to another.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
firzen
2nd Generation Specific (1986-1992)
9
Sep 15, 2015 12:04 PM
Steven_McKinley
General Rotary Tech Support
12
Sep 5, 2015 10:48 AM
rotor_veux
2nd Generation Specific (1986-1992)
5
Sep 3, 2015 07:10 PM




All times are GMT -5. The time now is 08:00 PM.