2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Electrical issues help?

Thread Tools
 
Search this Thread
 
Old Jul 26, 2011 | 04:56 PM
  #1  
asiansuperstar's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Aug 2006
Posts: 153
Likes: 0
From: Seattle
Electrical issues help?

So lately my 7's power (radio,clock) restarts when I brake while driving. It was having problems starting up as it would take a few cranks also. So recently it wouldn't stop starting! It will only start when i jump start it. I figured it was a bad battery so I went out and threw a new one in. That did not solve the issue, still had to jump start the car and the speakers don't work now. I checked out my alternator and it measured 13.89V. Before I change my alternator,belts, and maybe even starter would anyone encountered similar problems?

Thanks guys!
Reply
Old Jul 26, 2011 | 05:34 PM
  #2  
AGreen's Avatar
Trunk Ornament
Tenured Member: 15 Years
iTrader: (11)
 
Joined: Sep 2006
Posts: 3,054
Likes: 2
From: Goose Creek, SC
It's not the voltage the alternator puts out, it's the current you're worried about. If it's the stock alternator on (I'm guessing) an S4, then that's probably the issue. I had a problem with my aftermarket stereo cutting out every time I hit the brake pedal. I installed LED brake lights, and it band-aided the problem for a little while. Alternator output voltage was good too, around 14v. I installed an FD alternator and that was the end of all my problems.

Also, a battery with high cold cranking amps helps things too. I tried getting a relatively small battery for my relocation, but soon realized that such a small battery will die quickly in a car with 80's electronics.

Good luck
Reply
Old Jul 27, 2011 | 04:16 AM
  #3  
asiansuperstar's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Aug 2006
Posts: 153
Likes: 0
From: Seattle
Thanks I got my car to start fine now. My battery connections were really corroded so I cleaned them and tighted my belts. Seemed to do the job EXCEPT my deck works but my speakers don't. What the..
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
firzen
2nd Generation Specific (1986-1992)
9
Sep 15, 2015 12:04 PM
SakeBomb Garage
Vendor Classifieds
1
Sep 7, 2015 03:44 PM
SakeBomb Garage
SakeBomb Garage
1
Sep 7, 2015 03:32 PM
rotor_veux
2nd Generation Specific (1986-1992)
5
Sep 3, 2015 07:10 PM




All times are GMT -5. The time now is 08:04 PM.