EL NENE 7's - "EYE CANDY" --"The Road to 450HP"
no ceramic apex seals yet, on my next motor once i finish my set up i will be buying parts again slowly but to have new housings, rx8 rotors,lightened rotors, ceramic coated evrything, 3mm seals pinned motor, BRIGDE PORT ....WEEEEEEEEEEEEEEEEE
capable to withstand 600hp on the street , that will be started after i turn my new set up ON...yeaahhhhh but thats thinking ahead right now i am focusing on building my engines supporting mods to uphold my current set up and in the future" my future set up
UPDATE-my clutch hasnt arrived yet i bought it a long time ago and its still not here i am pissed but hey i got time, i am a nice guy, we will wait it out
\
capable to withstand 600hp on the street , that will be started after i turn my new set up ON...yeaahhhhh but thats thinking ahead right now i am focusing on building my engines supporting mods to uphold my current set up and in the future" my future set up
UPDATE-my clutch hasnt arrived yet i bought it a long time ago and its still not here i am pissed but hey i got time, i am a nice guy, we will wait it out
\
a/c i can live with out
heater- florida is already to hot and in the winter a sweater and leave the car in the garage i am straight, hell my engine heat will keep me warm
power steering- hahah i like the ROAD FEEL better just not the parking feel..lol
heater- florida is already to hot and in the winter a sweater and leave the car in the garage i am straight, hell my engine heat will keep me warm
power steering- hahah i like the ROAD FEEL better just not the parking feel..lol
I gotta agree with ya on the Manual Steering feel. Definetly got feel the road.
I'd ditch the AC but here in the desert, I'd probobly die without it!
Nice looking fuel rail. What size inj you going with?
NOICE!
im going for the same thing!!!!
i just paid a guy for a E6K!!!
should have it by the end of the week!!
your WAYYY ahead of me though!!
i have MANY parts left to get!
im going for the same thing!!!!
i just paid a guy for a E6K!!!
should have it by the end of the week!!
your WAYYY ahead of me though!!
i have MANY parts left to get!
Originally Posted by 88t2romad
what sort of o-rings will you be using along with the KG rails?
pics as promised
ATKINS O-RING KIT and GASKET KIT, plus oil cap
Next is my LINCOLN TOWNCAR RADIATOR this thing is huge measuring 26x19 i will need two relays to run , it should blow well over 3800cfm
ATKINS O-RING KIT and GASKET KIT, plus oil cap
Next is my LINCOLN TOWNCAR RADIATOR this thing is huge measuring 26x19 i will need two relays to run , it should blow well over 3800cfm
UPDATE -My mazda OEM apex springs arrived today also
so far i spent $780 on all my new rebuild kit and finally i am done not bad considering the cost of rebuild kits, all you need is a little patience and time to search for good deals and good sellers
i did my streetports, i also did all the cleaning of my engine and rotors
also the ceramic paint i layed doen on the irons and housings- note: pics of the housings will be posted soon ,just have to let it dry
On the fan, well the most used e-fan for our rx7s is the almighty FORD TAURUS fan yes its a great fan you will definatly notice cooling diffrence but with the help of LUCKY7RACING.COM i got my lincoln e-fan this thing is crazy
i blows so much air that i did a test at home , i put a basketball on the ground and turned it on it clearly blew it away, now for this much power i will need to run two relays
the radiator is 27.5x19x3 its a huge bitch!!!
i will make some custom mounting brackets to make it work as a direct bolt in with rubber bushings to help it with vibration and flexing
so far i spent $780 on all my new rebuild kit and finally i am done not bad considering the cost of rebuild kits, all you need is a little patience and time to search for good deals and good sellers
i did my streetports, i also did all the cleaning of my engine and rotors
also the ceramic paint i layed doen on the irons and housings- note: pics of the housings will be posted soon ,just have to let it dry
On the fan, well the most used e-fan for our rx7s is the almighty FORD TAURUS fan yes its a great fan you will definatly notice cooling diffrence but with the help of LUCKY7RACING.COM i got my lincoln e-fan this thing is crazy
i blows so much air that i did a test at home , i put a basketball on the ground and turned it on it clearly blew it away, now for this much power i will need to run two relays
the radiator is 27.5x19x3 its a huge bitch!!!
i will make some custom mounting brackets to make it work as a direct bolt in with rubber bushings to help it with vibration and flexing
Originally Posted by stylEmon
eww, you got the super Hi-Flow stock down pipe.
ditching that nastyness for a 3" panspeed. like to go 4", but i'll wait till big turbo time.
looking good
ditching that nastyness for a 3" panspeed. like to go 4", but i'll wait till big turbo time.
looking good
the stocker is going to GUITARJUNKIES rx8 to 2nd gen conversion
Originally Posted by sik7even
slow *** car....thats y my 175 hp NA will beat u!!! lol i dont even kno how much hp i got. Jus wanted to bother ur **** ***. We waitin on u bro. Come home jackass!!!
now am i gonna have to make your **** brideport or are we gonna spray it
UPDATE------
I just got my HALTECH E6X
woot woot now all i will need is a resistor pack and i am straight, i got the INNOVATIVE T70 on order also so pics of these will be coming soon as they arrive
I just got my HALTECH E6X
woot woot now all i will need is a resistor pack and i am straight, i got the INNOVATIVE T70 on order also so pics of these will be coming soon as they arrive
