ecu question
05-13-03, 08:17 PM
#1
Will Work for Beer
Thread Starter
Join Date: Apr 2003
Location: Lincoln, Ne
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
ecu question
i'm puting a 13b out of an 88 non turbo rx7 in my 84 gsl-se. i found a ecu out of a 89 non turbo. will that ecu work for the 88 engine?
05-13-03, 08:25 PM
#3
Will Work for Beer
Thread Starter
Join Date: Apr 2003
Location: Lincoln, Ne
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
well shouldn't the sensors be the same? for the 88 to 89? both engines are non turbo. and harness is a given. this os gona sound stupid but what is a AFM? i bet i just dont' nkow the abr. word
05-13-03, 09:19 PM
#4
Former Moderator. RIP Icemark.
There is a FAQ at the top of this section as far as the abr...
But AFM is Air Flow Sensor
and although a few of the sensors are the same (such as the O2); the fuel injectors, TPS and other things are not.
But AFM is Air Flow Sensor
and although a few of the sensors are the same (such as the O2); the fuel injectors, TPS and other things are not.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM