ecu and fcd question

Reply Subscribe

Thread Tools

Search this Thread

Jun 18, 2005 | 04:20 PM

RotaryBuddha

Thread Starter

CURVE OF CONSTANT WIDTH

iTrader: (4)

Joined: Mar 2004

Posts: 2,314

Likes: 1

From: Wesley Chapel, FL

ecu and fcd question

sorry dont have time to search for this. but finally got around to tearing up the carpet to get to the ecu to see if a fcd was even installed. noticing guy i got it from didnt now **** about the car. anyways, right now got a 350 afm 350 ecu 370 pressure sensor on a s5 motor. will these work together? and found the hks fcd was their next to the ecu but i dont know if it installed right anyone have were the wires are suppoused to go. and the dial on it was set to #8

Jun 18, 2005 | 06:17 PM

slpin

7th Heaven

iTrader: (9)

Joined: Nov 2004

Posts: 3,663

Likes: 4

From: California

it will work...

but, swap the ecu over so you can boost over 3ish psi safely
and then change the afm so you will have a correct instead of a way rich mixture...

Jun 18, 2005 | 06:26 PM

RotaryBuddha

Thread Starter

CURVE OF CONSTANT WIDTH

iTrader: (4)

Joined: Mar 2004

Posts: 2,314

Likes: 1

From: Wesley Chapel, FL

what is the 350 from

Jun 22, 2005 | 05:28 PM

RotaryBuddha

Thread Starter

CURVE OF CONSTANT WIDTH

iTrader: (4)

Joined: Mar 2004

Posts: 2,314

Likes: 1

From: Wesley Chapel, FL

so would the wire harness that is their now for the 350 just plug straight into the 370

Jun 22, 2005 | 05:56 PM

Wankel7

Haven't we ALL heard this

Joined: Mar 2001

Posts: 3,948

Likes: 1

From: Indiana

HKS FCD - Setting 2 for the s4/s5 rx7

Jun 22, 2005 | 06:22 PM

RotaryBuddha

Thread Starter

CURVE OF CONSTANT WIDTH

iTrader: (4)

Joined: Mar 2004

Posts: 2,314

Likes: 1

From: Wesley Chapel, FL

but would the fcd even work on a 350 ecu. according to http://www.rotaryresurrection.com/ro...older/ecu.html the 350 was for a n.a. does it even have a fuel cut?