I have a Turbo II s4, and I did not have an innercooler mount when I bought the car. On the workshop manual I believe it is called the dynamic chamber bracket, but they dont really show the easiest way to install these.

I was hoping someone in this forum would be able to tell me the easist way to install this part in my car without removing a whole bunch of uneccesary parts. From what I can tell the innercooler and maybe some additional intake piping will need to be removed, but aside from that any help will be very appreciated.

P.S. Pics would be great.

 

Are you talking about the metal bracket near the oil fill neck? Or the bracket on the top mount?

 

we need pics man. I have no clue what you're talking about.

 

hes talking about the bracket underneath the stock intercooler. Its above the filler neck. Mine didnt come with one either and i can care less cause im gonna fmic that hoe.

 

OHHHHHHHHHHHHHHHHHHHHH. I'll look to see if I have mine but I think I threw it out (went FMIC)

 

Hey Phoenix7, you got any pictures of your front mount on hand?

 

I dont have that mount either, the intake pipes hold it in place pretty well, then I just put in the two bolts on the other side and its fine.

 

nope. Ihave to upload them from home. I'll try to have something by tomorrow.

 

This is the part I was talking about that needs to be installed.

 

so does any one know the easiest way to install this part?

 

did you already remove the TB elbow, TPS and the stuff around the top of the block?

 

This is the best I could do. You can see that you HAVE to remove the TB, then the TPS, the alternator, and then anything alongside the engine.

Sorry I couldn't find better pics.

Why are you trying to get that back ON?? shouldn't you be trying to get it off????

replace the TMIC and go front mount!

I used a higgitrix TB elbow and got rid of that horrible bend at the stock elbow!

 

I'd sell you mine but its helpful to have it when you wanna take out the engine.

 

Thanks for the help man

 

were you able to get it on?