Driveshaft rattle??
#26
I wanta be with the BUC!
Join Date: Jan 2003
Location: Knoxville, TN
Posts: 2,305
Likes: 0
Received 0 Likes
on
0 Posts
Apparently you do, you were the one that said it wasn't a front diff mount. So why are you asking me who cares
And I don't know if you have looked at a front wheel drive car lately, but the tranny, and transfercase are made into one, and then it goes into transaxle's, which then go to the wheels.
And I don't know if you have looked at a front wheel drive car lately, but the tranny, and transfercase are made into one, and then it goes into transaxle's, which then go to the wheels.
#28
Resident Know-it-All
iTrader: (3)
uhh..dude im pretty sure there are very very few cars that have a front differential. every front wheel drive i have ever seen (which is a lot) has the diff integrated innto the transmission...hence the name transaxle. which is what fwd cars have. and you say front mount because its on the front therefore he knows which of the 3 it is. geez. ok im outta this thread...
#29
Originally posted by SureShot
The RX-7 language:
Thunk (when starting out) - Front diff mount.
Tink (when starting out) - u-joints
Clunk or groan (with suspension movement) - old grommets.
Zoom zoom (short cycle) - vac leak
Zoom zoom (long cycle) - TPS or BAC or grounds
Crunch - high rev shift to 2nd
Beeeeeeee - over rev or low coolant or low oil.
RrRrRrRrR - starter gear sound (normal)
rrrrrrrrrrrr - starter gear sound (flooded)
RrRrRrrrRrrrR - starter gear sound (bad apex seal)
The RX-7 language:
Thunk (when starting out) - Front diff mount.
Tink (when starting out) - u-joints
Clunk or groan (with suspension movement) - old grommets.
Zoom zoom (short cycle) - vac leak
Zoom zoom (long cycle) - TPS or BAC or grounds
Crunch - high rev shift to 2nd
Beeeeeeee - over rev or low coolant or low oil.
RrRrRrRrR - starter gear sound (normal)
rrrrrrrrrrrr - starter gear sound (flooded)
RrRrRrrrRrrrR - starter gear sound (bad apex seal)
Also, can anyone on here point me towards a place that sells a set of suspension grommets? Any time I turn the steering wheel I get little clunks from the front end and the grommets look worn when I look under my car.
Thanks
#30
Junior Member
Thread Starter
Join Date: Sep 2003
Location: El Monte, CA
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
alrite kids come down j/k. well i got my car my school shop i'm gonna put on the lift and check it out. i hope it's just a simple heat shield.
I'm sorta relieve that there is a great possibility that my driveshaft is not the problem.
I'll post the result later, and if i fix it, and that did i do to fix it. thanx for all the help...
I'm sorta relieve that there is a great possibility that my driveshaft is not the problem.
I'll post the result later, and if i fix it, and that did i do to fix it. thanx for all the help...
#31
I wanta be with the BUC!
Join Date: Jan 2003
Location: Knoxville, TN
Posts: 2,305
Likes: 0
Received 0 Likes
on
0 Posts
If you front diff mount is bad, it will be very easy to tell. Just grab the front of the differential, and push it up and down, if it move more than a little, then it is broke.
And if you want a drive shaft i have a TII one for sale
But I'm not sure if it fits an NA or not
And if you want a drive shaft i have a TII one for sale
But I'm not sure if it fits an NA or not
#32
Junior Member
Thread Starter
Join Date: Sep 2003
Location: El Monte, CA
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
I check it a while ago in my school's shop my teacher everything seems to be ok.
I think whats rattling is the loose fuel filter. it's hitting the frame. I figured its that. I'm gonna try to mound it properly hopefully the quiets the problem.
Now to my next problem is the exhaust leak and that loose shifter...i need to buy the bushing for it.
Oh thanks for the help...
I think whats rattling is the loose fuel filter. it's hitting the frame. I figured its that. I'm gonna try to mound it properly hopefully the quiets the problem.
Now to my next problem is the exhaust leak and that loose shifter...i need to buy the bushing for it.
Oh thanks for the help...
#33
Senior Member
Join Date: Sep 2002
Location: in your mother
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
We have the same problems, but I don't think mine is the fuel pump. It is a much slower and metal bumping noise. I took it to a shop, and they didn't know what was wrong with it. So I'm on to My other problems (the above stated two of many)
Thread
Thread Starter
Forum
Replies
Last Post