well?

 

Nope mine dont.. i got sleepies... i think it makes the car look drunk.. gotta love it..
Dave

 

I've got the one eyed wink going on. I've seen some cars with the mentally challenged look, one eye higher than the other

 

my 86 that i bought for 500 works great no noise or anything .. the 88 i bought for 500 they work but don't sound so great but still work .

 

they go up AND down...a little noisey on the way up thought ;-)

-tommy

 

As of now? Yes. They are soon to be replaced with my newly acquired East Bear Headlight Kit.

 

Mine are jacked up. My driver side will go down, but not up. When I disconnect the bar from the motor, the motor will swing up and down as it is supposed to, but when I hook it to the lamp bucket, it's almost like it can't lift the weight.... I'm not sure why.. I posted about it a while ago, and people said check wiring... I did. Looks fine.

It happened when I was fooling with my brake cooling ducts. The ones that direct air from the front bumper to the brakes... I was straightening it out some (it's hard when the car was in an accident before and isn't perfect anymore) and I unhooked the bar to the motor so that I could get access to this bolt, and when I reconnected it, I had it backwards. One went up, one went down. So I switched them, and the problem started.

I'm not sure, but I think I might have wound the manual dial too far one way, but I'm not sure which way! so how could I know?! I've tried going the opposite a few turns, but no success. So that's where I stand. I just plan to leave them in the up position at all times until I solve it. Sucks. any other suggestions or ideas for a cure? i'm about to replace the damn motor itself.

-Kanaida

 

Mine work perfect...

East bear would be nice...but $$!

 

east bear reminds me of Kermit...I like the idea of dual projector heads but not ugly ones....ugly in my opinion anyways...lol.

 

Mine are sleepy, because my drivers side headlight flips up and down, non stop. So i put new fuses/large things that connect to motor... and put new headlight motors in )lots of $$$( from Mazdatrix. and one still flips, i checked the wireing and everything... Can the motorts be reset? or when turning the manual dial can you go too far making it go up and down?


Thanks guys, Markus

 

I really gotta ask! Whats kermit? The freaken frog?

 

yep...the froggy.

 

That hilarious. Not to many fans of the EB.

 

Thats not east bear, but a RE Amemiya 2k kit...I'm not positive if theres a diference between the lights..but I see no "kermit" look....

 

im picking up that RE kit when i go to japan next week....its only like 400 bucks

 

You sure on the price? Thats awesome...you should get some people round up to do a buy type thing ..******* 1100 something for it here..

 

East bear kit does not modify the front bumper at all...that makes the 90mm lights stick up above the hoodline about an inch and a half or so. Froggy eyes.

RE and East Bear are NOT the same...

 

I'd much rather have a full RE kit, looks so damn nice!

Throw up a pic of the east bear if you have one handy..

 

yeah...i checked the price on the RE site....(kinda hard to navigate through japanese symbols) and then converted the yen to dollars. It was 600....my bad. But im sure i can find it cheaper there.

 

both of my TII's lights worked fine. and the 6 friends with FC's also. I've only heard of them not working. HHMMM shouldn't have said that.

 

oops

 

Oops Is right!

 

i wanna see a pic of that east bear kit
i heard its cheap and looks nice
where is it at????

and my lights have always worked...... no sleepy eye thing.....

 

Mine both work with a tad bit of noise. The slider needs to be lubed

 

Passenger one works great. Drivers one doesn't ever since something got lodged in there while turning off the headlights but it still goes down, just not all the way up