2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

downpipe upgrade makes no power?

Thread Tools
 
Search this Thread
 
Old Jun 28, 2003 | 08:11 AM
  #1  
ajobson's Avatar
Thread Starter
Newbie
 
Joined: May 2003
Posts: 1
Likes: 0
From: Louisville, KY
downpipe upgrade makes no power?

Last night we took my friend's 87 TII down to the drag strip. Since our new RB Complete Exhaust System downpipe hadn't arrived, we decided to use the old Complete Exhaust System downpipe that a junkyard had sliced up (pic below).

I know with the complete exhaust system the car should run more boost and make a ton more power, so we figured this downpipe should make at least as much since it's even less restrictive. The problem is, it didn't seem to make ANY more power. The noise was incredible, as was the boost response... it no longer really felt like a turbocharged car because there was no lag whatsoever. But in the end it doesn't seem to be any faster.

We had an FCD installed, but we were still running the stock fuel pump. At one point the O2 sensor wire either tore out or melted off, but fixing it didn't seem to make any difference. Is there something else I'm overlooking that could cause it to not be any faster?
Reply
Old Jun 28, 2003 | 09:06 AM
  #2  
Fingers's Avatar
Rotary Freak
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 2,788
Likes: 0
From: Ottawa, Ontario
A restrictive air filter would be the first place to start.

that downpipe, because it is dumped, should have definitely given you power that you can physically feel over the stock system.
Reply
Old Jun 28, 2003 | 10:20 AM
  #3  
Dougster's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Dec 2002
Posts: 596
Likes: 0
From: Indy In.
Is the TID leak free? Is the gasket around the Turbo/manifold good? You can loose a ton of boost in both those area's What other mods do u have? I assume its well tuned?
Reply




All times are GMT -5. The time now is 12:29 AM.