do S4 t2 ecu's pick up tach signal?
Thread Starter
Joined: Feb 2005
Posts: 1,933
Likes: 0
From: OrangePark FL
do S4 t2 ecu's pick up tach signal?
does the s4 t2 ecu pick up tach signals? and if it does which wire is it and another tach be spliced in to pick up the signal? thanks
the ECU sends the signal to the trailing coil, the trailing coil sends the tach signal to the tachometer. from the tachometer it goes nowhere, the origination engine RPM signal goes through the ECU from the CAS.
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
You can always pick up the Tach signal from the Trailing or leading coil Bullet connector.That is how you can get a signal to an aftermarket Tach,if that is what you are doing.
Thread Starter
Joined: Feb 2005
Posts: 1,933
Likes: 0
From: OrangePark FL
ok i underststand now. and you are right about an after market tach but i was hoping to try and keep the wires inside the car. thats why i was asking if i could pick up the signal from inside the car at the ecu.
thanks guys for the quick replys
thanks guys for the quick replys
Trending Topics
http://www.cochran-racing.com/FSM/s4...NG_DIAGRAM.pdf
Thread Starter
Joined: Feb 2005
Posts: 1,933
Likes: 0
From: OrangePark FL
There is nothing currently wrong with my fuel gauge. I am wanting to put a aftermarket fuel gauge in my car. After speaking with sharingan he said that there is no aftermarket gauge that reads the same values as the fc fuel level sending unit so a aftermarket gauge will never work/read correctly. Is this true?
Joined: May 2006
Posts: 3,881
Likes: 3
From: Jacksonville, Tampa & Tallahassee
There is nothing currently wrong with my fuel gauge. I am wanting to put a aftermarket fuel gauge in my car. After speaking with sharingan he said that there is no aftermarket gauge that reads the same values as the fc fuel level sending unit so a aftermarket gauge will never work/read correctly. Is this true?
The one caveat being, there are some aftermarket fuel level gauges w/adjustable senders, that could probably be made to read "pretty close". However they do not come in 45mm and will not work in you modified gauge cluster.
Just follow the writeup in the thread and stop trying to be difficult.
Thread
Thread Starter
Forum
Replies
Last Post
freq
2nd Generation Specific (1986-1992)
0
Aug 21, 2015 03:30 PM



