2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

do fc rx's have fuel rails

Thread Tools
 
Search this Thread
 
Old Sep 7, 2003 | 09:48 PM
  #1  
Rx7 922's Avatar
Thread Starter
Senior Member
Tenured Member: 20 Years
 
Joined: Mar 2003
Posts: 390
Likes: 0
From: San Jose, Ca
do fc rx's have fuel rails

i was wondering it the fc3s 91 turbo II have fuel rails
Reply
Old Sep 7, 2003 | 09:49 PM
  #2  
Rx7 922's Avatar
Thread Starter
Senior Member
Tenured Member: 20 Years
 
Joined: Mar 2003
Posts: 390
Likes: 0
From: San Jose, Ca
and if so where can i buy them from so i can put in my 720cc
Reply
Old Sep 8, 2003 | 01:29 AM
  #3  
NZConvertible's Avatar
I'm a boost creep...
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 15,608
Likes: 8
From: Auckland, New Zealand
All EFI engines have fuel rails.

Most top-feed 720cc/min injectors are drop-in replacements for the stock ones.
Reply
Old Sep 8, 2003 | 08:56 AM
  #4  
Senior Member
Tenured Member 05 Years
 
Joined: Mar 2002
Posts: 333
Likes: 0
From: Springfield, MO
just make sure they are the same impedence
Reply
Old Sep 8, 2003 | 10:10 AM
  #5  
Black13B's Avatar
In Full Autist Cosplay
Tenured Member 15 Years
iTrader: (1)
 
Joined: Nov 2002
Posts: 2,330
Likes: 0
From: Alberta
S4 injectors run low impedance, S5 injectors are high impedance.
Reply
Old Sep 8, 2003 | 01:51 PM
  #6  
Senior Member
Tenured Member 05 Years
 
Joined: Mar 2002
Posts: 333
Likes: 0
From: Springfield, MO
ya... what he said

GSL-SE injectors are 680, and ive been told they flow more than that. around the 700 range. but I guess you already have injectors so... ill shut up
Reply
Old Sep 8, 2003 | 02:20 PM
  #7  
bottlejockey's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Oct 2001
Posts: 134
Likes: 0
From: Hutchinson, KS
I was told by a tech guy from rx7.com not to mess with the fuel injectors because the stock ones supply plenty of fuel even for 400 hp. thats just what he said.
Reply
Old Sep 8, 2003 | 02:47 PM
  #8  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
He's wrong. They give advice like that so they sell more engines.
Reply
Old Sep 8, 2003 | 03:13 PM
  #9  
Kuhrazy7's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Sep 2002
Posts: 199
Likes: 0
From: So Cal
Since you have an s5, If there like greddy top feed 720s then you'll want to put some 10w/10ohm resistors on since those are low impedence injectors. If there just stock bored out to 720cc by like rc eng. then u can just put them in and use them with no injector harness modification. Your secondary fuel rail is more then adequate for 720cc primary use.
Reply
Old Sep 8, 2003 | 06:00 PM
  #10  
Rotary Freak
Veteran: Army
Tenured Member 20 Years
iTrader: (1)
 
Joined: Jul 2001
Posts: 1,972
Likes: 147
From: JAX, FL
Originally posted by Black13B
S4 injectors run low impedance, S5 injectors are high impedance.
I believe 87 1/2 turbos also went to high impedance, but for sure 88 turbos had them...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
astrum
2nd Generation Specific (1986-1992)
24
Nov 15, 2017 08:44 AM




All times are GMT -5. The time now is 12:02 PM.