2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

DIY door mirror removal

Thread Tools
 
Search this Thread
 
Old May 19, 2009 | 02:38 PM
  #1  
thejallenator's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 10 Years
iTrader: (14)
 
Joined: Mar 2009
Posts: 1,161
Likes: 0
From: the dalles
DIY door mirror removal

so after driving around without a driver side mirror i finally found one, well actually more like the whole driver side door. only 20 bucks. and it is great condition with power windows.

anyways couldnt get any pictures, cam broke. but for the most part i think words alone will help with this one.
first off remove the black plastic triangle piece that covers the access to the screws holdin on the mirror.
next remove the 3 phillips screws and the small metal bracket from the inside of the car.
then from the outside give the mirror a little tug. this should remove it from the car. but becareful not to pull too hard and damage the plug.
the next step there are 2 options for. you can either take the screw out that holds the wires to the mirror or get the wires to slide out of the door. i took the screw out so i could have a little more to work with.
then just wiggle the wires out of the door and unplug the mirror from the harness.
thats it. and to replace it just go in the reverse order that you did to remove it.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
msilvia
3rd Generation Specific (1993-2002)
28
Apr 14, 2016 12:58 PM




All times are GMT -5. The time now is 07:19 AM.