ok so i just got my car to start again. well now the idle wants to drop down to about .5 and then die. i adjusted the TPS and even replaced it, followed by another adjustment. still dies. i dont have a ohmmeter or multimeter right now so i cant tell the exact output of the TPS. what else should i check (BAC, ACV)???...i also pulled the ecu codes and at first i got a AFM error so i fixed that(it was leaning at awkward angle) and then it showed that i had a 02 sensor had gone bad....i checked it and the sensor had come unpluged. i checked again and now there is no error code present. i also checked all intercooler pipes for a vac leak but there are none present...about 2 days ago it would idle at about .2 or .3 and after i replaced the tps and adjusted it, it wont even hold idle....thanks for the help in advance

 

Read the FSM on setting your idle. You may need to adjust your throttle stops.

 

also i just checked and the BAC isnt even connected...im in the process of blocking it off right now...

 

well blocking it off only made it worse......any suggestions on what to do next