differences in harnesses
01-10-06, 10:42 AM
#1
Play Well
Thread Starter
Join Date: Feb 2005
Location: We're all fine here now, thank you. How are you?
Posts: 4,218
Likes: 0
Received 0 Likes
on
0 Posts
differences in harnesses
I didnt see this in the archives but if I go from s4 na to s5 na. I know that the engine harness is diffent but are the dash harnesses.
Like does the s4 dash harness plug into the s5 ecu. I know that the s5 gauges read to 9k and I may just change it all over. just want to know what all options I have
thanks inadvance sorry if I missed it somewhere
Like does the s4 dash harness plug into the s5 ecu. I know that the s5 gauges read to 9k and I may just change it all over. just want to know what all options I have
thanks inadvance sorry if I missed it somewhere
01-10-06, 10:51 AM
#2
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Series 4 and series 5 Meter harness and Front harness are different.
You might and probably can rearrange the wires in the Meter harness to match the Front harness of a differnet series. Icemark has shown the pinouts in the past. You MIGHT even find information in the FAQ at the beginning of this Second Gen section, that applies.
Since both the series four and the series five wiring diagrams are now available for free downloads, I see no reason you can't just look at the two diagrams and figure out which wires need to go where.
You might and probably can rearrange the wires in the Meter harness to match the Front harness of a differnet series. Icemark has shown the pinouts in the past. You MIGHT even find information in the FAQ at the beginning of this Second Gen section, that applies.
Since both the series four and the series five wiring diagrams are now available for free downloads, I see no reason you can't just look at the two diagrams and figure out which wires need to go where.
01-10-06, 10:56 AM
#3
Play Well
Thread Starter
Join Date: Feb 2005
Location: We're all fine here now, thank you. How are you?
Posts: 4,218
Likes: 0
Received 0 Likes
on
0 Posts
hmm I may just change over to the s5 gauges then. Becuase everytime i mess with changing around wires nothing seems to work.
01-10-06, 11:47 AM
#4
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Here's your starter kit/thread: https://www.rx7club.com/showthread.p...=gauge+cluster
01-10-06, 12:12 PM
#5
Play Well
Thread Starter
Join Date: Feb 2005
Location: We're all fine here now, thank you. How are you?
Posts: 4,218
Likes: 0
Received 0 Likes
on
0 Posts
That is an awsome bit of info there. Is it in the archives. i searched and it didnt come up for some reason. If it isnt in the archives it should be. Thanks again
Thread
Thread Starter
Forum
Replies
Last Post