Crate engine......
#1
Junior Member
Thread Starter
Join Date: Nov 2003
Location: Palm Desert, CA
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Crate engine......
Does anyone know the best place to find a 13b crate engine, that is not that expensive? I just need a replacement for the stock engine, nothing high performance. If not were can I find an inexpensive rebuild kit? Thanks.
#4
Bongolio
you can GET ALL THE PARTS FOR A REBUILD FOR ABOUT 500$
from atkins rotary,
gasket kit#16259-130$
2mm corner seal plug set#16193-22.20$
93-95 corner seal spring set#16714-27.00$
13b 2mm side seal spring set#1618722.20$
viton oil ring inserts#16578-39.95$
front main seal#16622-3.75$
rear main seal#16623-7.50$
thermal pellet#1640-10.50$
hylomar sealent.
from atkins rotary,
gasket kit#16259-130$
2mm corner seal plug set#16193-22.20$
93-95 corner seal spring set#16714-27.00$
13b 2mm side seal spring set#1618722.20$
viton oil ring inserts#16578-39.95$
front main seal#16622-3.75$
rear main seal#16623-7.50$
thermal pellet#1640-10.50$
hylomar sealent.
Last edited by KillaKitiie; 03-02-05 at 05:59 PM.
#5
Former Moderator. RIP Icemark.
For a remanufactured crate style engine your mazda dealer is probably your best bet. Most FC short blocks are around $2000-$2500 with exchange from most dealers.
If you just need a rebuilt engine, I suggest Kevin at Rotary Resurrection. Good reputation and does great work. I thought he was rebuilding for around $1000, but check with him.
For rebuilding it yourself, I recommend Rotary Aviation's rebuild kit-minus apex seals (I personally would get my apex seals from Mazda).
If you just need a rebuilt engine, I suggest Kevin at Rotary Resurrection. Good reputation and does great work. I thought he was rebuilding for around $1000, but check with him.
For rebuilding it yourself, I recommend Rotary Aviation's rebuild kit-minus apex seals (I personally would get my apex seals from Mazda).
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM
Tom
1st Generation Specific (1979-1985)
3
03-12-04 03:38 PM