2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Cranks But Wont Start?

Thread Tools
 
Search this Thread
 
Old Aug 6, 2006 | 04:41 PM
  #1  
-=1OneShotNO2=-'s Avatar
Thread Starter
F.F.F.F.C UNIT!
Tenured Member 05 Years
 
Joined: Mar 2005
Posts: 205
Likes: 0
From: California
Cranks But Wont Start?

I put my dash back together and tried to start the car, and all I get is cranking. No power to the guages, and no warning lights come on, even when the key is left in the on position. I am pretty sure I plugged everything back in correctly, but what does it sound like it could be?
Reply
Old Aug 6, 2006 | 07:29 PM
  #2  
-=1OneShotNO2=-'s Avatar
Thread Starter
F.F.F.F.C UNIT!
Tenured Member 05 Years
 
Joined: Mar 2005
Posts: 205
Likes: 0
From: California
Double checked every connection and everything is fine, still no warning lights or guages Any help anyone?
Reply
Old Aug 6, 2006 | 07:52 PM
  #3  
J-Rat's Avatar
Alcohol Fueled!
Tenured Member 20 Years
iTrader: (2)
 
Joined: Jan 2002
Posts: 11,093
Likes: 2
From: Hood River oregon
Check the fuses yet>
Reply
Old Aug 6, 2006 | 08:12 PM
  #4  
-=1OneShotNO2=-'s Avatar
Thread Starter
F.F.F.F.C UNIT!
Tenured Member 05 Years
 
Joined: Mar 2005
Posts: 205
Likes: 0
From: California
Yep, 7.5 illumination fuse on the drivers side right? It was good.
Reply
Old Aug 6, 2006 | 08:15 PM
  #5  
calrx7's Avatar
aim** JI II IM IM Y
Tenured Member 05 Years
 
Joined: May 2005
Posts: 495
Likes: 0
From: 90703 cerritos california
probibly sensors. use a multimeter on all of em
Reply
Old Aug 6, 2006 | 09:29 PM
  #6  
-=1OneShotNO2=-'s Avatar
Thread Starter
F.F.F.F.C UNIT!
Tenured Member 05 Years
 
Joined: Mar 2005
Posts: 205
Likes: 0
From: California
I dont think it is the sensors, I was thinking that there is no power to the instrument cluster and warning light system. I checked the wires from the ignition switch, and all the connections.
Reply
Old Aug 7, 2006 | 10:16 PM
  #7  
-=1OneShotNO2=-'s Avatar
Thread Starter
F.F.F.F.C UNIT!
Tenured Member 05 Years
 
Joined: Mar 2005
Posts: 205
Likes: 0
From: California
A day later.. Ive checked everything I can think of and I have spent more time studying wiring diagrams than sleeping.. thinking about getting her towed to a mechanic for a diagnosis, and possible repair, although I really do not want to. Any help at all guys?
Reply
Old Aug 8, 2006 | 01:54 AM
  #8  
ericgrau's Avatar
Clean.
Tenured Member 10 Years
iTrader: (1)
 
Joined: Mar 2005
Posts: 2,521
Likes: 3
From: Huntington Beach, CA
Personally I'd go to a mechanic after so much effort. Or wait until someone here gives you a good tip before proceeding.

I mean, how much is the mechanic going to charge? How many hours have you worked on it? Do you have a job? Can you work longer hours there instead?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
whinin
New Member RX-7 Technical
10
Sep 5, 2015 11:52 PM
rx7shirley
2nd Generation Specific (1986-1992)
6
Sep 2, 2015 02:11 PM




All times are GMT -5. The time now is 12:14 AM.