CPU missing one plug
Thread Starter
Rotary Enthusiast
Joined: Jan 2002
Posts: 975
Likes: 5
From: Puerto Rico Land Of The Fastest Rotaries
CPU missing one plug
Could that be the reason why my blinkers nor turn signals work? It has the big plug then it has two smaller ones on the bottom, one of them is missing and 7 loose wires are hanging tied with electrical tape. The missing plug has 7 connectors anybody got a diagram so I can place the wires where they belong?
Former Moderator. RIP Icemark.
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
what series?
The 7 pin connector is normally the Hazard/turn signal
three pin row on the top:
Blue/green, connector, Green/Yellow, Green/white
Bottom row, 4 pins:
Green/Black, Black/blue, Green/Red, Black
The 7 pin connector is normally the Hazard/turn signal
three pin row on the top:
Blue/green, connector, Green/Yellow, Green/white
Bottom row, 4 pins:
Green/Black, Black/blue, Green/Red, Black
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
Sep 1, 2015 10:46 PM
