Ok i am now very close to getting my car back on the road after many repairs ive done over the winter months, but now i have some things i need help with.

1. Im hooking up a mechanicle water temp gauge and i need to know the exact place to tap into for the probe. I have done research on this and from what ive read the best place in near the thermostat but WHERE exactly.

2. Next thing is I solved my idle/pulsing problem (sort of) but now when i start up my car (with TB mod done) and hold it for a minute at 3krpm I hear like this random sputering type sound comming from the exaust. Its like the engine has some sort of pre-ignition thing going on. Basically the engine is running but not so smoothly. I do have some fuel mods, i think im running rich or also some sort of bad timing is causing this but i want your opinions.

3. Along with the sputtering problem i have a pulsing problem below 2k rpm. This is really wierd. When i hold light throttle the engine just pulses like crazy, then when i let it go it goes away or when i give it hard throttle.

Please check the Sig also.

Thanks!!

 

bump

 

Wish I knew more... but alas, I am pretty new to cars in general (my FC being my first car) hope someone comes around with some answers for ya.

iSP33D-for-J3SUS