Hey guys, just installed these things, and will be providing a very detailed write up, shortly. I just figured I'd let you know there is a small error in these, in the face on the voltage meter. The hole for the little stopper peg on the meter is not properly aligned. All you need to do to correct this is get a safety pin, or other large small needle and punch it through the little blue dot to the left of the hole already in place.

Don't have pics at the moment, but I can get some up shortly.

By the way, these gauge faces, are really nice. They are very crisp and bright and really add to the overall aesthetics of the dash, in my opinion.

 

people who may not be as mechanically inclined as us and who do not want to pay outrages prices for others to do it for them, or those who are still uneasy about tearing int o their FC and possibly damaging something because of an incorrect guess

 

Post a write-up.

Then when people email me about how to install gauges I'll just send them a link to it

 

yeah i think a write up is a good idea, its not exactly as easy as changing the oil to install teh gauges if your not carful u might break some of the gauges...

i had a freind who took her guage cluster apart and started spinning the tach needle around, and it stoped working after that haha....

 

i'd actually like to see them installed i'm not really a big fan of them since i like that orange 80 look, but i would like to see an interior updated to look more modern

 

Don't trash the guy he wants to give a wright up to help others install a set forum members get a grip just because you don't like them don't trash other people like a little kid that's why some times forum members don't want to help others because of little kids like you ,if you don't like it go to another page ,sorry for getting serious but you ruin peoples pages

 

id like a write up...

 

I just installed the ebay reverse glow gauges and I ended up breaking off the pin for my fuel guage eventhough I was very carefull and followed the instuctions to the letter. Then I realized I could of avoided taking off the needles by simply sliping on the face gauges since they where flexable. All I had to do was take out the screws and slip them in then replace the screws. I just wanted to share my experience with yall so you guys can avoid breaking anything expensive.

 

hmmm, we really need this write up!

 

I'd write one up but I'm no good at it. I hope whoever writes one up will take my previous post in consideration.

 

I ordered those gauges from CS a month ago and they're still not here I'm assuming they'll eventually show up...I hope...
So yea a write-up would be greatly appreciated!