Cooling System check
#1
TyrannosaurusRX7
Thread Starter
Cooling System check
Pressure tested my cooling system, pumped 15 psi found a very small leak between bell housing and engine. What's the best remedy I can do for this leak? Fresh rebuilt. Please help!
#3
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Make sure it's not one of the coolant hoses to the throttle body and BAC. Also make sure the leak is not coming from the heater hoses which enter the firewall directly above the bellhousing.
Failing those, it could be a freeze plug on the rear iron behind the flywheel.
Failing those, it could be a freeze plug on the rear iron behind the flywheel.
Thread
Thread Starter
Forum
Replies
Last Post
driftfcbuckey
The Bad & Fugly Members
10
12-02-15 05:48 PM