Is this a cooling problem? HELP!!
#1
Newbie
Thread Starter
Join Date: Feb 2005
Location: detroit
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Is this a cooling problem? HELP!!
I am in the process of buying an fc, which has the na 13b. I talked to the owner and he says that the car runs and drives, but when the engine getes hot after driving it, and you shut it off, it will not restart until the engine cools down. This is my first rotary and I'm stupid, so any help asap would be EXTREMELY appreciated. thanks
#2
Senior Member
Join Date: Mar 2004
Location: Victoria, BC
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
It is probably a flooding problem possibly from leaky injectors or an engine that is losing compression (big tip : always do a compression test b4 buying a rotary: http://www.rotaryresurrection.com/ro...lder/comp.html )
Flooding prob described here:
http://www.rotaryresurrection.com/ro.../flooding.html
Here is a RX-7 buying guide too fyi :
http://www.fc3spro.com/TECH/h2b.html
thanks to the good people at Rotary Ressurection and FC3Spro
Flooding prob described here:
http://www.rotaryresurrection.com/ro.../flooding.html
Here is a RX-7 buying guide too fyi :
http://www.fc3spro.com/TECH/h2b.html
thanks to the good people at Rotary Ressurection and FC3Spro
Last edited by Tiers; 03-09-05 at 12:47 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM