Cooling Fan Warning Light
#1
Full Member
Thread Starter
Join Date: Aug 2001
Location: Mass
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
Cooling Fan Warning Light
I recently removed my A/C and removed the little electric cooling fan on the condenser too. I just taped up the wires (keeping pos/neg seperate obviously)
Now my Cooling Fan warning light comes on all the time, which is to be expected, but it comes on at random times, and will turn on and off for no reason (that I can tell)
since it's not doing me any good, I'd like to disable it, or at least fool it, does anyone know how?
Thanks,
Now my Cooling Fan warning light comes on all the time, which is to be expected, but it comes on at random times, and will turn on and off for no reason (that I can tell)
since it's not doing me any good, I'd like to disable it, or at least fool it, does anyone know how?
Thanks,
#3
Tenseiga
iTrader: (1)
Join Date: Apr 2003
Location: Iowa
Posts: 2,252
Likes: 0
Received 0 Likes
on
0 Posts
I had the same problem. It would turn off/on and then it just stayed on after a couple of days.
Just take the light buld out.......it only takes like 5 min.
Doesn't cause any ill effects on the car (i took the relay out just to be sure)
Just take the light buld out.......it only takes like 5 min.
Doesn't cause any ill effects on the car (i took the relay out just to be sure)
Last edited by Sesshoumaru; 09-24-03 at 04:56 PM.
#4
Full Member
Thread Starter
Join Date: Aug 2001
Location: Mass
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
How would I take the light bulb out? I'm sure I could do some guessing and checking with a screw driver or something and figure it out, but I'd prefer not to break anymore of my plastic trim.
Thanks again
Thanks again
#6
Former Moderator. RIP Icemark.
The one in the idiot lights?
then it is easiest to just remove the bulb. It unscrews.
If it is the one in the gauge cluster, then just cut or disconnect the Black/Red wire at the back of the gauges.
then it is easiest to just remove the bulb. It unscrews.
If it is the one in the gauge cluster, then just cut or disconnect the Black/Red wire at the back of the gauges.
Trending Topics
#8
Tenseiga
iTrader: (1)
Join Date: Apr 2003
Location: Iowa
Posts: 2,252
Likes: 0
Received 0 Likes
on
0 Posts
i'm pretty sure he's talking about the one in the idiot cluster. The exact same thing happend to me when i removed the A/C condensor fan and that's what i did.
The Cooling Fan light is only found in the idiot cluster that i know of.
The Cooling Fan light is only found in the idiot cluster that i know of.
Thread
Thread Starter
Forum
Replies
Last Post