converting an auto to manual...
#1
Junior Member
Thread Starter
Join Date: Apr 2002
Location: Kansas City
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
converting an auto to manual...
I have a 91 na automatic.......its gay, well dont get me wrong i love my rx.....but either im converting it to a manual or im getting a new car (an fd would be nice). but i was just wondering if anyone knew what price range im talking here. I know it'll be quite expensive, but im just wondering what others have been charged.
#2
Moderatorator
Join Date: Apr 2002
Location: Canton, Michigan
Posts: 507
Likes: 0
Received 0 Likes
on
0 Posts
Please use the forum's 'search' feature next time.
Contact hypntyz as he has done many swaps and has a write up.
Contact hypntyz as he has done many swaps and has a write up.
Last edited by mazdamanda; 11-18-02 at 01:21 AM.
#3
Banned. I got OWNED!!!
#4
IT'S EASY TO DO.....
we got an old car for $700 took the motor and trannie out changed the trannie from auto to manual and put back in. total 4 hours. make sure you locate a pilot bearing , 2 1/4? scoket , some big friends to help loosen the nut.
the car will be used as backup parts for the race car.
hope this helps
we got an old car for $700 took the motor and trannie out changed the trannie from auto to manual and put back in. total 4 hours. make sure you locate a pilot bearing , 2 1/4? scoket , some big friends to help loosen the nut.
the car will be used as backup parts for the race car.
hope this helps
#5
Senior Member
do a search......... i just finished mine on my 90 vert and i love it, its real easy
-Shawn
btw, it cost me about $800 for all the parts (did the swap myself)
-Shawn
btw, it cost me about $800 for all the parts (did the swap myself)
#7
Senior Member
tranny was pulled from a car it was rebuilt and had about 20-30 k on it after the rebuilt, the clutch is used (ran outta cash, but i am getting a new one )the tranny also came with drive shaft, clutch comonets, pedal, ect (basicly everything i needed except a starter) i had to buy a few other parts , like a pilot bearing.
btw the swap would have cost me about 600 if i didn't need a rad and other parts that were already broken and needed to be replaced
-Shawn
btw the swap would have cost me about 600 if i didn't need a rad and other parts that were already broken and needed to be replaced
-Shawn
Last edited by rx_7_driver; 11-19-02 at 03:28 PM.
Thread
Thread Starter
Forum
Replies
Last Post