I installed a 3rd party steering wheel which doesn't have an airbag, so the AIRBAG warning light keeps flashing. Is there any way to override it? Aside from installing the OEM steering wheel back, that is...

Thanks.

 

You would have to unplug the SRS modual to stop the light from flashing

 

wheres that? i already unplugged the kickpanel and underhood fuse for it

 

Hmm....I unplugged my fuse and it doesnt blink. I wonder if it's still engaged then?

 

Ok, my vert came with an aftermarket wheel so i had the same problem. I soldered the two wires that go to the airbag together. If the ecu sees a break in the wire it flashes the warning. You can conect them at the wire for the wheel or below the dash where the cable to the airbag conects.

 

Thanks guys. I would have to try that.

 

I installed resistors at the airbag connections 330 Ohm .5 watt

 

Ooooooooooooh good idea!!!

 

I still have my OEM steering wheel, but this happens every now and then, Flashing 6 times every 8 seconds. I am already in Limp Mode and about to send the ECU off to get fixed. Just wondering if this is a cause of something else?

 

It's really easy to remove the Airbag Module and Backup Battery. They're behind the dash right by your left knee. There are two teal boxes with Ford logos on them. The small heavy one is the battery and the larger one right next to it is the module. Remove both of them.

The wires to the battery are also good if you need power for anything, since it is a 30amp circuit.

 

I did not get rid of the flashing however, when I opened the idiot cluster to fix the clock, I placed a piece of black tape on the square for the airbag. It still blinks but I don't see it.
Just a thought!

 

why didnt you just take the bulb out of the back?

 

Something else happen when I would take the bulb out. Can remember the exact reason.