Connector in Door Behind Plastic?????
Thread Starter
What Subscription?
Joined: Apr 2001
Posts: 5,926
Likes: 2
From: Aiken SC USA
Connector in Door Behind Plastic?????
Ok Wiring Guru's:
I removed the Passenger side Door panle on my 86 GXL. Behind the clear plastic moisture shield is a 2 prongged connector. What is the purpose of this?
Pics later. Thank you for your time!
I removed the Passenger side Door panle on my 86 GXL. Behind the clear plastic moisture shield is a 2 prongged connector. What is the purpose of this?
Pics later. Thank you for your time!
![[bnd]'s Avatar](https://www.rx7club.com/customavatars/avatar222_1.gif){kind=avatar}
Trending Topics
infini guru
Joined: Nov 2001
Posts: 1,183
Likes: 0
From: Sunnyvale, CA
Were illuminated door lock cylinders an option? Could be just an empty spot on the harness for a feature your car didn't come with... Man, I am so tempted to go take apart my door right now!
Steve
Steve
infini guru
Joined: Nov 2001
Posts: 1,183
Likes: 0
From: Sunnyvale, CA
Ok, I couldn't resist....
First off, I have a '90 TII, and it looks as though our wiring harnesses may be a little different. But here's what mine looks like:
The first connector to the left also goes to the power window unit, and supplies power(I think).
The second connector in the middle which has black and blue wires coming FROM it go to the door lock cylinder light. This is the connector I think you are pointing your pliers at.
Finally, the third connector on the left, which has a Red and Green wire coming FROM it goes to the power windows, I am assuming it sends control signals(what the hell, I have a 50/50 shot at being right, right?).
I also checked further up the door near the front of the car, and found a few connectors that might be the one you were wondering about, it's either power locks, or a doorwoofer connection. I can post more detailed pics if you need them. I am fairly certain that I'm correct, but as I said in the beginning, our wiring harnesses look a little different, so I could be totally wrong. Hope this helps!
Steve
First off, I have a '90 TII, and it looks as though our wiring harnesses may be a little different. But here's what mine looks like:
The first connector to the left also goes to the power window unit, and supplies power(I think).
The second connector in the middle which has black and blue wires coming FROM it go to the door lock cylinder light. This is the connector I think you are pointing your pliers at.
Finally, the third connector on the left, which has a Red and Green wire coming FROM it goes to the power windows, I am assuming it sends control signals(what the hell, I have a 50/50 shot at being right, right?).
I also checked further up the door near the front of the car, and found a few connectors that might be the one you were wondering about, it's either power locks, or a doorwoofer connection. I can post more detailed pics if you need them. I am fairly certain that I'm correct, but as I said in the beginning, our wiring harnesses look a little different, so I could be totally wrong. Hope this helps!
Steve
Last edited by MtnRacer; Jun 22, 2002 at 09:44 AM.
