2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Compatibility/differences of harness

Thread Tools
 
Search this Thread
 
Old Apr 16, 2006 | 05:10 PM
  #1  
coxxoc's Avatar
Thread Starter
Shooting for 500
Tenured Member: 20 Years
Liked
Loved
iTrader: (3)
 
Joined: Jan 2006
Posts: 833
Likes: 53
From: Redmond, WA
Compatibility/differences of harness

I purchased a harness from a forum member and communicated it needed to be for an 88 tii. Well, when I got it and installed it, there was no plug for my sunroof and I dont see any cut wires or anything. Also, my headlights work funny now. The lights come on when they are down and i have to use the flip up switch to make them come up. Also when I hit the brakes with the lights on, it makes a buzzing noise. Before everything functioned normally. Any ideas? Is this a non turbo harness and are there known issues? I'm pretty lost.
Reply
Old Apr 17, 2006 | 09:36 AM
  #2  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
could you have a S5 harness??? As far as the lights, the non turbo and Turbo use the same light harness at the switch, but the two series do not.
Reply
Old Apr 18, 2006 | 01:50 AM
  #3  
coxxoc's Avatar
Thread Starter
Shooting for 500
Tenured Member: 20 Years
Liked
Loved
iTrader: (3)
 
Joined: Jan 2006
Posts: 833
Likes: 53
From: Redmond, WA
The thing that throws me off is that i cant find a place to plug in my sunroof (the connector under the dash that runs toward the a piller). Everything else plugged in. I'm going to try to find what the buzzing is when I hit the brakes with the lights on. Anyoned else have any ideas?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
scissorhands
New Member RX-7 Technical
0
Sep 16, 2015 01:25 PM




All times are GMT -5. The time now is 08:21 AM.