2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

cold start

Thread Tools
 
Search this Thread
 
Old Feb 5, 2004 | 09:40 AM
  #1  
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 339
Likes: 0
From: So Cal.
cold start

When ever i start my car in the morning it immediately revs to 3K rpm (stays for a while), then drops to 2K and sits there for a while, and then drops to 1,500 rpm where it goes up and down between 1250 and 1550 rpm. I revs up and down and up and down. I know about the accelerated warm up process, but is this the correct procedure? Also, when it try to hold the engine at 1,500 rpm it does the same thing. it fluctuates up and down and wont hold 1500. This is done when the engine is already warm. Is this normal?
Reply
Old Feb 5, 2004 | 09:45 AM
  #2  
Baka_Gaijin v2.0's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Nov 2003
Posts: 86
Likes: 0
From: Sevierville,TN
i think all 2nd gens do that i usually run out there and press the gas and let it go up to about 2500rpm and hold it there for a few secs and it will usually go away...also i noticed my car dosent do it if i press the clutch to the floor...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
whinin
Introduce yourself
17
Mar 30, 2019 07:53 PM
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
rx7shirley
2nd Generation Specific (1986-1992)
6
Sep 2, 2015 02:11 PM




All times are GMT -5. The time now is 04:53 PM.