Code 11
#1
somewhat damaged
Thread Starter
Join Date: Mar 2002
Location: NC
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Code 11
I blistered a heater hose the other day on my '90 GTU(driver's side, next to the firewall), and after I replaced it my check engine light came on and has stayed on since. I did the CPU test thing to give me the code and it came back with a code 11 [Intake Air Thermosensor (Engine)]. The car itself is not acting up, but I know that as long as the light is on there is something wrong and the engine is running on default settings. What should I check to correct this problem and what should I look for when driving the car? Thanks a bunch.
#2
I came, I saw, I boosted.
Join Date: Apr 2001
Location: Windsor, Ontario, Canada
Posts: 1,921
Likes: 0
Received 0 Likes
on
0 Posts
You knocked the sensor plug off. I've done it more than a few times.
It plugs into the sensor on the intake manifold- It's right where that hose is, and comes off very easily.
It's a 2 prong plug, on the driverside/rear of the intake manifold, on the top section.... kindof behind the VDI actuator...
Hope you find it! If it's still on, than you may have cut the wire(s) by accident.
Dan
It plugs into the sensor on the intake manifold- It's right where that hose is, and comes off very easily.
It's a 2 prong plug, on the driverside/rear of the intake manifold, on the top section.... kindof behind the VDI actuator...
Hope you find it! If it's still on, than you may have cut the wire(s) by accident.
Dan
#3
BamBam7...you rule!
My car was throwing an 11....and sure enough, i knocked off that damn sensor thing too
This forum rules..... who needs a mechanic when you have this website
Cardio
My car was throwing an 11....and sure enough, i knocked off that damn sensor thing too
This forum rules..... who needs a mechanic when you have this website
Cardio
Thread
Thread Starter
Forum
Replies
Last Post
SakeBomb Garage
Group Buy & Product Dev. FD RX-7
8
10-09-15 10:05 PM