Before my car needed a rebuilt the clutch worked fine then i did the swap na to t2 and now the clutch wont get hard like it used to be. I bleed the clutch like ten times a day since like may. So what could be wrong?

 

Anybody?

 

First, your question needs to be comprehensible.

Did you put a TII moter to a NA transmission or a NA motor to a TII transmission?

Did you change the Pressure plate?

 

It has a t2 engine to na trans i left the stock na pressure plate on

 

Change Both the master and slave.It will cost you about 120 Tops.Bleed it with a One man Brake bleeder kit.Fill the Master,and crack the bleeder on the slave.Now,with Juice in the bottle to prevent air getting sucked back,just Pump,Pump,pump,until you see clear Fluid In the hose attached between the bleeder screw and the Bottle.,then Close the bleeder..It worked Friggin Dandy for me.since all my Buddys Seem to have something to do when I have to do **** to my car..Funny,I am always there when they Need help.(things are Gonna change in that Area!)..Good luck.

 

thanks i'll try that