hey guys me again, here's the problem now.....ok i finally bled the clutch and after driving pefectly for two days straight with no problems what so ever my ******* clutch hits the floor. now i've tried bleeding once more, but the pedal just sticks then come up slowly....not going into gears, when i'm pump the clutch its fluid is getting sucked in BUT still not getting back pressure in it but i havent seen and leaks or dripping fluid n e where around the car.. alson when i pump the clutch the fluid goes down then starts to bubble a little... guys please let me know what has happened... really wanna fix this as soon as possible.....thanks

o one more thing my car idles between 1000 and 1500rpms jus jumps up and down never higher never lower why is that??.... thanks again

 

Sounds like the clutch master cyl has failed internally,

and your TPS is out of adjustment

 

so do i just get a new one or can it be fixed??? also the fluid is black now....really dont know wtf thats about..

 

fluid will only be dark for one of two different reasons.

1= that is has absorbed a ton of water
2= that the rubber seals inside the master have failed

and personally I woul djust run down to the local autoparts shop and buy a rebuilt slave and a rebuilt master, but if you are handy and have tools like a small hone you could try and rebuild them yourself.

remember is you rebuild/replace one, also rebuild/replace the other (and I would probably do the flexible line as well)>

 

i thought thanks alot i'll change them both...how much ou think that will cost?? what about the lines?