clutch line
04-18-06, 04:50 PM
#1
Junior Member
Thread Starter
Join Date: Oct 2005
Location: mount vernon washington
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
clutch line
okay so i got a leak in the soft line that conects the clutch master and slave is there anything i can buy at shucks or napa that they would stock to bolt in or do i have to order one from somewere im looking for more of a quick solution so i can move the car to a friends house i dont care about having to do it over or how long it will last
04-18-06, 05:50 PM
#2
I believe napa and the like should carry that flex line....
the only other thing would be to get some steel line and flare it...using the proper metric fittings you could put the steel ine in place just for a short drive.....BUT:
be sure to make a long winding of the steel line in order to allow the movement of the motor and tranny relative to the body - other wise you'll cause other problems.
BTW - I recommend that you fix the thing properly and if you do the above - although it may get you where you're going - is dangerous and stupid....and well as lazy - no wait, its not lazy because it means you'll have to do the job twice....its just dangerous and stupid
the only other thing would be to get some steel line and flare it...using the proper metric fittings you could put the steel ine in place just for a short drive.....BUT:
be sure to make a long winding of the steel line in order to allow the movement of the motor and tranny relative to the body - other wise you'll cause other problems.
BTW - I recommend that you fix the thing properly and if you do the above - although it may get you where you're going - is dangerous and stupid....and well as lazy - no wait, its not lazy because it means you'll have to do the job twice....its just dangerous and stupid
Thread
Thread Starter
Forum
Replies
Last Post
NCross
2nd Generation Specific (1986-1992)
9
09-03-15 03:42 PM