clutch and elec fan ??
Thread Starter
Full Member
Joined: Apr 2001
Posts: 227
Likes: 0
From: Virginia
clutch and elec fan ??
1) Hey for those running an electric fan in your NA what setup are you using???
2)Check out this clutch flywheel combo and let me know what you think. NOTE: [scroll to the middle to the internet combo section]
http://www.shaneracing.com/sr86clch.html
I am not sure if i should get the NA or the T2 one. My car is a 87gxlna but I am swaping tranny for a t2???
thanx for the help in Adv.
GZ
Rotary Enthusiast
Joined: Mar 2001
Posts: 1,273
Likes: 0
From: Ft. Worth, Texas, USA, Earth, Solar System...
Re: clutch and elec fan ??
Originally posted by gr0undz3r0
1) Hey for those running an electric fan in your NA what setup are you using???
2)Check out this clutch flywheel combo and let me know what you think. NOTE: [scroll to the middle to the internet combo section]
http://www.shaneracing.com/sr86clch.html
I am not sure if i should get the NA or the T2 one. My car is a 87gxlna but I am swaping tranny for a t2???
thanx for the help in Adv.
GZ
1) Hey for those running an electric fan in your NA what setup are you using???
2)Check out this clutch flywheel combo and let me know what you think. NOTE: [scroll to the middle to the internet combo section]
http://www.shaneracing.com/sr86clch.html
I am not sure if i should get the NA or the T2 one. My car is a 87gxlna but I am swaping tranny for a t2???
thanx for the help in Adv.
GZ
2) If you are using a TII transmission, you have to use a TII clutch. You will also need a TII flywheel from the same year motor as yours. (and a TII starter, and a TII clutch slave cylinder, and a TII driveshaft, and a TII differential and axle shafts...)
Thread Starter
Full Member
Joined: Apr 2001
Posts: 227
Likes: 0
From: Virginia
Re: Re: clutch and elec fan ??
Originally posted by rx7_ragtop
1) I'm using a perma-cool. It is NOT adequate- get a different fan.
2) If you are using a TII transmission, you have to use a TII clutch. You will also need a TII flywheel from the same year motor as yours. (and a TII starter, and a TII clutch slave cylinder, and a TII driveshaft, and a TII differential and axle shafts...)
1) I'm using a perma-cool. It is NOT adequate- get a different fan.
2) If you are using a TII transmission, you have to use a TII clutch. You will also need a TII flywheel from the same year motor as yours. (and a TII starter, and a TII clutch slave cylinder, and a TII driveshaft, and a TII differential and axle shafts...)
Also I am getting TII start TII clutch Slave cylinder TII driveshaft TII differential TII Axle shafts... but as far as the clutch flywheel combo kit i will assume that if i get the one from the T2 that should be everything right..??
Information Regurgitator
Joined: Feb 2001
Posts: 1,994
Likes: 208
From: Sparta TN. United States
Re: Re: clutch and elec fan ??
Originally posted by rx7_ragtop
1) I'm using a perma-cool. It is NOT adequate- get a different fan.
2) If you are using a TII transmission, you have to use a TII clutch. You will also need a TII flywheel from the same year motor as yours. (and a TII starter, and a TII clutch slave cylinder, and a TII driveshaft, and a TII differential and axle shafts...)
1) I'm using a perma-cool. It is NOT adequate- get a different fan.
2) If you are using a TII transmission, you have to use a TII clutch. You will also need a TII flywheel from the same year motor as yours. (and a TII starter, and a TII clutch slave cylinder, and a TII driveshaft, and a TII differential and axle shafts...)
Thread
Thread Starter
Forum
Replies
Last Post