Clutch to BellHousing ground

Reply Subscribe

Thread Tools

Search this Thread

07-17-03, 11:00 AM

jetfire76

Gas Guzzlin' Tire Junkie

Thread Starter

Join Date: Aug 2002

Location: 19805

Posts: 459

Likes: 0

Received 0 Likes on 0 Posts

Clutch to BellHousing ground

ok, i am trying to replace this ground but the bolt that holds the wire on the bellhousing is stripped. can i just snip this wire entirely and use another bolt to attach the wire to the firewall?

Reply Like

07-17-03, 11:22 AM

dr0x

pei > caek

Join Date: May 2002

Location: Mars

Posts: 4,643

Likes: 0

Received 0 Likes on 0 Posts

Yep.

Reply Like

07-17-03, 11:44 AM

jetfire76

Gas Guzzlin' Tire Junkie

Thread Starter

Join Date: Aug 2002

Location: 19805

Posts: 459

Likes: 0

Received 0 Likes on 0 Posts

Reply Like

07-17-03, 12:57 PM

SureShot

Seduced by the DARK SIDE

Join Date: Apr 2001

Location: Orange Park FL (near Jax)

Posts: 7,323

Likes: 0

Received 2 Likes on 2 Posts

Maybe add a ground from the alternator frame to the strut tower & coil pack mount while you're in there.

Reply Like

07-17-03, 01:32 PM

Relisys190

REINCARNATED

iTrader: (4)

Join Date: Apr 2003

Location: South Eastern USA

Posts: 1,642

Likes: 549

Received 140 Likes on 98 Posts

here we go on grounds again... it's a good topic though.. just like sureshot said, from the altenator braket to the strut tower, than reground the coil pack while your add it, and than might as well reground your ECU... And your atmospheric pressure sensor as well... and just to be safe, i added a ground from the exhaust manifold to the firewall.

-Markus

"Just my 7 cents"