charcoal can runs where?
#1
Needs more Displacement.
Thread Starter
Join Date: Jun 2005
Location: Louisville, Ky
Posts: 1,329
Likes: 0
Received 0 Likes
on
0 Posts
charcoal can runs where?
Alright, I just got the upperintakeand tb on my car and I'm seeing the charcoal canister is running over to the driver's side of the car and has a 1 ft hose run off of it and goes to nothing. My question is, does this line go into the UIM? If so, can I use either of the large ports on the top of the UIM?
Body S4 N/A
Engine S5 T2
Body S4 N/A
Engine S5 T2
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
If it is the 1 foot hose off the bottom of the canister, it's suppose to go nowhere.
Both hoses from the top connect to the emission pipes that run along the firewall.
Both hoses from the top connect to the emission pipes that run along the firewall.
#4
Needs more Displacement.
Thread Starter
Join Date: Jun 2005
Location: Louisville, Ky
Posts: 1,329
Likes: 0
Received 0 Likes
on
0 Posts
It's not off the bottom of the can. It comes out of the top and if you're looking at your car its the larger pipe that runs along the firewall, then I have a 1ft hose coming off the larger pipe on the firewall. So the larger pipe is also known as the emissions pipe correct? So where does the larger emissions pipe connect to??
#6
Junior Member
Join Date: Apr 2004
Location: lansing, mich
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
I believe it goes to the drivers side of the motor.
There is a nipple (metal) just behind the oil filler tube that the hose attaches to. It is hard to see. That was one of my problems with my rebuild install, trying to find were the canister hose went. I checked my old motor and saw it. Then removed my oil filler tube to attach the hose.
There is a nipple (metal) just behind the oil filler tube that the hose attaches to. It is hard to see. That was one of my problems with my rebuild install, trying to find were the canister hose went. I checked my old motor and saw it. Then removed my oil filler tube to attach the hose.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
turbo-minivan
General Rotary Tech Support
69
02-04-16 12:29 AM
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM