changed out door handle, now window wont roll down
Thread Starter
Brap Brap Brap
Joined: Mar 2010
Posts: 153
Likes: 0
From: Tulsa
changed out door handle, now window wont roll down
Title specifies. I was removing the interior door panel, and the wiring to the passenger switch became disconnected. I put it all back together (No wires actually came undone, the little board dislodged from the housing.)
I put it all back together, and the pass. window does not roll down, either from the passenger switch, or the drivers switch.
I have used two different passenger switches, and have tried two different window regulators, and I get no movement. The only thing that has changed is this:
Came undone from this:
And there is power to the regulator, but for some reason it is not reading any up or down signal from either switch, the drivers window goes up and down.
Any Ideas?
I put it all back together, and the pass. window does not roll down, either from the passenger switch, or the drivers switch.
I have used two different passenger switches, and have tried two different window regulators, and I get no movement. The only thing that has changed is this:
Came undone from this:
And there is power to the regulator, but for some reason it is not reading any up or down signal from either switch, the drivers window goes up and down.
Any Ideas?
